Eisterer M., Bruzzone P., Celentano G., Jirsa M., Laviano F., Nijhuis A., Muzzi L., Corato V., Rames M., Sedlak K., Duran I., Torsello D., Bykovskiy N., Anniballi G.
Ключевые слова: HTS, REBCO, coated conductors, cable-in-conduit conductor, cables, test results, coated conductors
Ключевые слова: fusion magnets, LTS, Nb3Sn, strands, cables, comparison, operational performance, inductance, test results, SULTAN, current sharing
Ключевые слова: fusion magnets, HTS, REBCO, Bi-based systems, soldered-stacked-square wire, Roebel conductors, strands, comparison, thermal stability, quench propagation, quench detection, quench temperature, SULTAN, measurement setup, measurement technique, current-voltage characteristics, experimental results
Ключевые слова: DEMO, Europe, central coils, coils solenoidal, LTS, Nb3Sn, HTS, tapes, REBCO, design, design parameters, mechanical properties, fatigue behavior, cycling, numerical analysis
Ключевые слова: LTS, Nb3Sn, cables, joints, joint resistances, fabrication, coatings, Cu-based conductors, diffusion process, measurement setup, microstructure
Ключевые слова: fusion magnets, HTS, tapes, coils, quench detection, MgB2, Nb3Sn, pnictides, wires, winding techniques, resistance, SULTAN, hot spots, experimental results
Bruzzone P., Celentano G., Zani L., Fietz W.H., Muzzi L., Fink S., Torre A., Corato V., Corte A.D., Sedlak K., Federici G., Sarasola X., Bykovskiy N., Dematte F.
Ключевые слова: central coils, design parameters, NbTi, coils outer, HTS, REBCO, coils insert, fusion, DEMO, Europe, magnetic systems, design, coils toroidal, design parameters, react-and-wind technique, LTS, Nb3Sn
Ключевые слова: LTS, Nb3Sn, strands, fabrication, heat treatment, microstructure, critical caracteristics, critical current density, Jc/B curves, n-value, grain size, ac losses, experimental results
Ключевые слова: EDIPO, high field magnets, LTS, Nb3Sn, Rutherford cables, design, design parameters, mechanical properties, cryogenic systems, quench protection, facility
Ключевые слова: ITER, coils toroidal, LTS, Nb3Sn, cable-in-conduit conductor, bronze process, internal tin method, ac losses, measurement technique, SULTAN
Bruzzone P., Muzzi L., Corato V., Marzi G.D., Corte A.D., Zignani C.F., Kumar M., Sedlak K., Formichetti A., Tiseanu I., Righetti R., Frittitta C.
Ключевые слова: Europe, DEMO, LTS, Nb3Sn, cables, coils toroidal, react-and-wind technique, design, modeling
Ключевые слова: ITER, coils toroidal, LTS, Nb3Sn, degradation studies, critical temperature, loads, quench, discharge characteristics, test results
Bruzzone P., Stepanov B., Zhang Y., Shi Y., Nijhuis A., Liu S., Long F., Qin J., Guo Z., Dai C., Xiang B., YuWu, Li. J., Derevd A.
Ключевые слова: DEMO, magnets, Nb3Sn, feeder, LTS, NbTi, cables, coils toroidal, coils poloidal field, central coils, design, design parameters, joints, bus bar conductor, HTS, REBCO, coated conductors, current leads, design, modeling
Ключевые слова: ITER, coils toroidal, LTS, Nb3Sn, cable-in-conduit conductor, cycling, loads, mechanical treatment, thermal performance, SULTAN, current sharing, strain effects, n-value, degradation studies, test results
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.